Why Logic Pro exports stems at different lengths (and how to make them match)

Logic Pro exports stems at different lengths because, by default, File > Export > All Tracks as Audio Files writes each file from the first region on that track to the last one. A bass that starts at bar 9 produces a file that starts at bar 9. A pad that ends at bar 60 produces a file that ends at bar 60. Nothing is broken. The fix is to give every track the same start and end point before you export, or to use a tool that does that for you.

I have delivered stems for hundreds of library tracks, and this is the complaint I hear most from people new to it. Here is why it happens, and the four ways to stop it.

What Logic is actually doing

Think of Export All Tracks as a set of individual track bounces. For each channel strip, Logic renders from the earliest region start to the latest region end, plus any tail you asked for. It does not look at the project start or at the other tracks.

That is fine when you are archiving parts for yourself. It is a problem when someone else has to line the files up, because a file that starts at bar 9 carries no information about bar 9.

Stems are different from individual tracks. A stem runs from the start of the song to the end, and every stem in a set shares the same length and start point. If you are not sure which you need to deliver, I cover that in how to export stems in Logic Pro.

Fix 1: set a cycle range and export that

The cleanest manual fix. Turn on Cycle (press C), then drag the cycle area in the ruler so it starts at bar 1 and ends a few seconds past the last reverb or delay tail.

Then go to File > Export > All Tracks as Audio Files (Command-Shift-E). In the dialog, look for the Range option and choose the cycle area rather than the whole project. In my experience, every exported file then starts at the cycle start and ends at the cycle end, whether or not the track has audio there. Check in your version, because the exact label of this option has changed between Logic releases.

If you do not see a range option in your dialog, set the project end marker instead. Logic will not write past the project end, so a project end that is too early is also why tails get chopped.

Fix 2: an empty region at bar 1 on every track

The older trick, and it still works. On every track, create a short empty audio region at bar 1. For software instrument tracks, an empty MIDI region at bar 1 does the same job.

The quickest way: record a second of silence on one audio track, then Option-drag that region to bar 1 on every other audio track. For instrument tracks, draw a blank region at bar 1 with the Pencil tool.

Now every file starts at bar 1. You still need the end points to match, which brings us to the tail setting.

Fix 3: Include Audio Tail

In the export dialog there is a checkbox called Include Audio Tail. When it is on, Logic keeps rendering past the last region until the output falls silent, so your reverb and delay tails make it into the file.

That is what you want for a natural sounding stem, but tracks with longer tails then produce longer files. If matching lengths matter more (a stem mastering engineer will usually say yes), turn Include Audio Tail off and set the cycle end far enough past the song that every tail has died out. You get the tails and the matching lengths.

Fix 4: One File per Channel Strip

Under Export as, choose One File per Channel Strip rather than One File per Track. This matters when your stems are Summing Stacks or aux buses. In my experience the stack outputs are far more consistent in length than the individual child tracks, especially combined with a cycle range.

If your mix is already grouped through buses (Drum Bus, Vox Bus, and so on), this gives you one file per bus, which is the structure most libraries and mixers expect. More on that in what music libraries want in a stem delivery.

What to check in the dialog before you hit Export

Run through this list every time. It takes 20 seconds and saves a re-delivery.

  • Range: cycle area, starting at bar 1.
  • Include Audio Tail: off if lengths must match exactly, on if tails matter more.
  • Export as: One File per Channel Strip for stems, One File per Track for multitracks.
  • Normalize: Off. Normalized stems will not sum back to your mix.
  • Bypass Effect Plug-ins: off, unless the recipient asked for dry tracks.
  • Include Volume/Pan Automation: on, so the stems reflect the mix.
  • Save Format and Bit Depth: WAV, 24-bit, unless the spec says otherwise.

After the export, open the folder in Finder and sort by size. Files of matching length and bit depth will be within a few kilobytes of each other. One outlier is the track you missed.

Where QuickStem fits

I built QuickStem because I was doing this checklist by hand on every song, and I still got it wrong once a month. QuickStem is a Mac app that drives Logic Pro through Apple's Accessibility API: solo, bounce, mute, the way you would with a mouse. It never touches your audio files, and it verifies the session is unchanged when it finishes.

Because it bounces each stem through Logic's own bounce across the same range, every file is full length, from the same start point, every time. No empty regions, no tail checkbox.

It scans your mixer and routing to find the stem structure. You review the groups, keep them or combine channels into custom stems, and pick mix versions: Full Mix, Instrumental, Unmastered Full Mix, Unmastered Instrumental and custom mixes, with your choice of master bus plug-ins bypassed for the unmastered ones. Custom file naming, saveable templates, a batch queue for several sessions overnight. Bounce All sorts the output into STEMS, MIX DELIVERABLES and DOCUMENTS folders.

QuickStem runs on macOS 14 or later with Logic Pro 11 or later (verified on Logic Pro 12). It is signed and notarized, and one licence covers two Macs. QuickStem Plus adds Smart Click + Cues and Lyric Transcription, free the first year and $19 a year after. Ableton Live and Pro Tools versions are coming.

Buy QuickStem for $49 or QuickStem Plus for $79 before the opening sale ends November 30, 2026 (regular $69 and $99). Every purchase includes one free Soundwall master.

FAQ

Why do my Logic Pro stems have different lengths? Export All Tracks writes each file from the first region on a track to the last one. Tracks that start late or end early produce shorter files. Set a cycle range from bar 1, or place an empty region at bar 1 on every track.

Does Include Audio Tail make stems longer? Yes. It renders past the last region until the signal falls silent, so tracks with long reverb or delay tails produce longer files. Turn it off and use a cycle range if every file must be the same length.

Do stems need to be the same length? For stems, yes. The whole point is that the recipient drops them at bar 1 and they line up and sum back to the mix. Individual multitracks can start wherever the part starts, but tell the recipient that is what you sent.

Does QuickStem make every stem the same length? Yes. It bounces each stem through Logic across the same range, so every file shares the same start point and length. It does not convert formats or edit the files afterward.


Author: John Coggins is the founder of Soundwall Studios in Westlake Village, CA, and the creator of QuickStem. He's a songwriter and producer with over 1,000 works registered with ASCAP and a long-time writer for Extreme Music.

Previous
Previous

Logic Pro stems not lining up in another DAW: the three causes and a two-minute null test

Next
Next

How to make a lyric sheet from your vocal (and why libraries and supervisors ask for one)