QuickStem vs Bounce Buddy: two new Logic Pro stem exporters compared

Bounce Buddy is for the mix engineer who wants stems grouped from stacks, buses and sends, with a null test and iPhone control. QuickStem is for the producer who ships complete deliveries: stems, full mix, instrumental and unmastered versions, named a specific way, from a saved template. Both drive Logic Pro for you. If you want deep routing analysis and a companion app, look at Bounce Buddy. If you deliver the same package repeatedly, QuickStem is built for that.

I'll be upfront. I make one of these. I built QuickStem at Soundwall Studios after years of bouncing stems by hand for library deliveries. Bounce Buddy is a new entrant working on the same problem, and the feature list shows real thought. This comparison is based on the Bounce Buddy website and what QuickStem actually does today.

What they have in common

Both apps act as a remote controller for Logic Pro. Neither one rewrites your project. They read the session, work out the stem structure, and drive Logic's own bounce function to print each stem. The audio you get is the same audio you would get by hand.

Both are non-destructive. Bounce Buddy states that it works from a duplicate of your project data and collects no analytics. QuickStem drives Logic through Apple's Accessibility API, never touches audio files, and verifies the session is unchanged after the run.

Both read your routing to find stems. Both need macOS 14 or later and Logic Pro 11 or later. Bounce Buddy recommends Logic Pro 12, and QuickStem is verified on it.

Where they differ

Bounce Buddy goes deep on routing. It groups tracks into stems from stacks, buses, sends and sidechains, using track colours as the stem list. It detects shared FX returns and lets you choose dry, wet or wet plus dry. It keeps sidechains working, handles nested sub-mixes, and can print without the mix-bus limiter. It supports offline or online bouncing, including hardware outboard. Versions (full mix, instrumental, TV mix, a cappella) each carry their own stem selection, FX choices and bounce range. You get an in-app preview and a phase-cancel null test against the full mix. An iOS companion app handles remote scan, bounce, review and push notifications.

QuickStem goes deep on the delivery. After the scan, keep the groups it found or combine channels into custom stems. Choose your mix versions: Full Mix, Instrumental, Unmastered Full Mix, Unmastered Instrumental, or custom mixes. For unmastered versions you pick which master-bus plug-ins get bypassed. Set custom file naming, save it as a template, and hit Bounce All. Output lands sorted into STEMS, MIX DELIVERABLES and DOCUMENTS folders. You can queue several sessions and run them overnight. Stems are stereo, bounced from the main output.

Availability is different. Bounce Buddy is in free beta, with version 1.0 listed as coming soon. The founder's price is EUR 49 one-time (from EUR 99) until version 1.1. QuickStem is shipping now, signed and notarized by Apple. It is $49 during the opening sale (regular $69), with QuickStem Plus at $79 (regular $99). The sale ends November 30, 2026. One QuickStem licence covers two Macs.

Comparison table

  • Status. QuickStem: Shipping, signed and notarized. Bounce Buddy: Free beta, 1.0 coming soon.

  • Price. QuickStem: $49 opening sale (reg. $69); Plus $79 (reg. $99). One-time. Bounce Buddy: EUR 49 founder's price (from EUR 99) until v1.1. One-time.

  • Macs per licence. QuickStem: Two. Bounce Buddy: Not listed on their page.

  • Requirements. QuickStem: macOS 14+, Logic Pro 11+ (verified on 12). Bounce Buddy: macOS 14+, Apple silicon, Logic Pro 11+ (12 recommended).

  • Stem grouping. QuickStem: Scan mixer and routing; keep groups or build custom stems. Bounce Buddy: From stacks, buses, sends, sidechains; track colours as stem list.

  • Mix versions. QuickStem: Full Mix, Instrumental, Unmastered Full, Unmastered Instrumental, custom. Bounce Buddy: Full mix, instrumental, TV mix, a cappella, each with own stems, FX and range.

  • Unmastered / no limiter. QuickStem: Choose which master-bus plug-ins to bypass. Bounce Buddy: Print without mix-bus limiter.

  • Shared FX returns. QuickStem: Not listed. Bounce Buddy: Detected; dry, wet, wet+dry.

  • Sidechains. QuickStem: Not listed. Bounce Buddy: Kept working.

  • Null test. QuickStem: Not listed. Bounce Buddy: Phase-cancel null test against full mix.

  • Custom file naming. QuickStem: Yes. Bounce Buddy: Not listed on their page.

  • Saveable templates. QuickStem: Yes, naming + mixes + settings. Bounce Buddy: Not listed on their page.

  • Batch / overnight queue. QuickStem: Yes, several sessions. Bounce Buddy: Not listed on their page.

  • Mobile companion. QuickStem: No. Bounce Buddy: iOS app: remote scan, bounce, review, notifications.

  • Click + spoken cues track. QuickStem: QuickStem Plus. Bounce Buddy: Not listed on their page.

  • Lyric sheet. QuickStem: QuickStem Plus. Bounce Buddy: Not listed on their page.

  • Free master included. QuickStem: One Soundwall master with every purchase. Bounce Buddy: No.

"Not listed on their page" means exactly that. Bounce Buddy may do some of these things. I can only compare against what they publish.

Who should buy Bounce Buddy

If you are a mix engineer with complex sessions, Bounce Buddy's routing analysis is the draw. Shared FX returns, sidechains and nested sub-mixes are where hand-bounced stems go wrong. Bounce Buddy addresses each one, and the null test lets you prove the stems sum back to the mix. QuickStem does not offer a null test.

If you run hardware outboard on your mix bus, the online bouncing support matters. If you want to start a bounce and walk away, the iOS app with push notifications is unique in this category. The beta is free, so there is no cost to try it. Be aware that 1.0 is still listed as coming soon, so you are buying into a product that is still finishing.

Who should buy QuickStem

If your deliveries look like mine did, QuickStem is built for you. Library and sync work means every track ships with a full mix, an instrumental and usually unmastered versions. Add a folder of stems named a specific way. QuickStem turns that into a template you set up once. Queue five sessions before bed. In the morning you have STEMS, MIX DELIVERABLES and DOCUMENTS folders for each one. It is shipping today, and one licence covers two Macs.

QuickStem Plus adds Smart Click + Cues. That is a stereo file with click on the left and spoken section cues on the right, placed from your song structure. It also adds Lyric Transcription, which turns the lead vocal into a lyric sheet you review before approving. It is cloud-based, free for your first year with Plus, then $19 a year. Every purchase includes one free Soundwall master. Ableton Live and Pro Tools versions are coming.

Where to go next

Read more on the QuickStem product page, or buy QuickStem for $49 or QuickStem Plus for $79 before the opening sale ends November 30. You can also read how QuickStem compares to Auto-Bounce. See the wider roundup of stem bouncing software for Logic Pro, or my guide to stem delivery for music libraries. The Bounce Buddy site has their full feature list.

FAQ

Is QuickStem a Bounce Buddy alternative?
Yes, for the core job of automated stem bouncing in Logic Pro. Bounce Buddy focuses on routing analysis and verification. QuickStem focuses on complete deliveries with mix versions, templates and an overnight batch queue.

Is Bounce Buddy available now?
Its page lists a free beta, with version 1.0 coming soon. QuickStem is shipping now and is signed and notarized by Apple.

Does either app change my Logic session?
No. Bounce Buddy says it works from a duplicate of your project data. QuickStem drives Logic through the Accessibility API, never touches audio files, and verifies the session is unchanged when it finishes.

Can I use QuickStem on more than one Mac?
Yes. One licence covers two of your own Macs. Buy QuickStem for $49 during the opening sale and upgrade to Plus later for $30.

Author: John Coggins is the founder of Soundwall Studios in Westlake Village, CA, and the creator of QuickStem. He's a songwriter and producer with over 1,000 works registered with ASCAP and a long-time writer for Extreme Music.

Previous
Previous

Why "Export All Tracks as Audio Files" is so slow in Logic Pro, and three faster ways

Next
Next

QuickStem vs EasyBounce: which Logic Pro stem bouncing app should you buy?